How does it compare to VEAUTY Dot?
Stop compromising.
See why theBeam replaces your entire shelf.
-
RF / Microcurrent
-
Hot / Cold Laser
-
LED Light
Basic RF / Microcurrent Devices
$$
$ - $$$
Lasting
Results
15W & 5.3MHz (clinic-comparable) RF + laser diodes
Simultaneous 4-in-1 firming system
Results compound
Surface
Results
Weak (1–3MHz) or no RF
Microcurrent/ EMS cannot remodel collagen
Toning results plateau quickly
Comfortable Experience
Gentle warmth, no twitching
Safe for frequent use
Inconsistent Experience
EMS twitching may worsen wrinkles
Hot spots risk fat loss
Precision Energy Delivery
Ultra-flat sapphire head
Full contact on all curves
8-Pole Titanium field
Flawed Contact Design
Tip or point design
Uneven contact & energy drop-off
2-Pole surface delivery
Portable &
Durable
Wireless & travel-ready
Full-body waterproof
Easy-clean
Hard to Use &
Maintain
Plug-in charging
Bulky build
Complex to clean and maintain
Hot/ Cold Laser Devices
$$
$$ - $$$$$
4-in-1
Synergy
650nm Low-Level Laser Diode & 630nm Red Light + 15W RF + Microcurrent
Simultaneous lift, firm, and renew
Full treatment in just 10 mins
Single-Energy Action
LYMA: 808nm (near-infrared) Cold Laser
NIRA/DermRays: Heat-Only Laser
Requires 20–30min daily sessions
Targeted
Firming
5.3MHz RF preserves fat pads
Precise 42°C collagen trigger
Visible fri in 28 days
Volume Risk / Slow Results
NIRA: Targeted thermal damage risks fat loss
DermRays: IPL targets surface only
LYMA: Lengthy use for visible change
Precision Engineering
Ultra-flat Sapphire Crystal head
8-Pole Titanium volumetric field
Wireless & Full-body Waterproof
Hardware Limitations
Small laser windows (spot treatments)
Uneven contact & energy drop-off
Have cords & hard to clean
LED Light Masks / Wands
$$
$ - $$$
Clinical
Synergy
650nm Low-Level Laser Diode & 630nm Red Light + RF + Microcurrent
Targets dermis & surface
Full treatment in just 10 mins
Surface-Only
Action
Low-energy LED light
Passive energy; no mechanical lift
Often requires 20+ mins
Visible
Firming
5.3MHz RF reaches 3.5mm deep
Delivers gentle thermal energy for firmer-looking skin
Firms skin without affecting natural facial contours
Limited
Results
No skin structure change
No thermal firming
Moderate energy; slow results
Precision
Engineering
Ultra-flat Sapphire Crystal head
8-Pole volumetric field
Full-body Waterproof
Hardware
Flaws
Plastic bulbs or flimsy wand tips
Uneven light distribution
Often corded or hard to clean
Not all RF is equal.
VEAUTY Dot: 1.5MHz, wattage undisclosed — fractional RF, surface warming, gone by morning.
theBeam: 5.3MHz & 15W RF, engineered to deliver energy beyond the surface layer for visible firming.
• One head. One investment. No treatment heads to keep repurchasing. The Sapphire & Titanium head is built to last the life of the device.
• 4-in-1 vs. single-function. RF, microcurrent, laser, and red-light technology in one chassis. VEAUTY Dot runs RF alone.
• 42°C thermal ceiling. Engineered to define contours without affecting facial volume.
• A true 650nm laser diode, not an LED. The same light technology found in professional clinic systems — not a red-light panel.
• Water-resistant to IPX6. Your ritual isn't confined to the vanity.
How does it compare to multi-tools like Amiro or Medicube?
While standard multi-tools like Medicube or Amiro offer variety, they often sacrifice power for versatility, typically operating at lower consumer-grade outputs.
theBeam is engineered as a clinic-inspired at-home alternative, delivering 15W of power and a 5.3MHz frequency — comparable to professional in-clinic systems such as Thermage® (6MHz)*. The core differences lie in technology and efficiency:
• Simultaneous vs. Sequential: Many devices require you to switch between separate modes for different treatments. theBeam uses 4-in-1 Synergy, firing Radio Frequency, Microcurrent, Laser, and Red Light simultaneously to complete a full 4-in-1 treatment in just 10 minutes.
• True Laser vs. LED: While devices like the Medicube focus on surface-level LED and electroporation, they lack precision laser diodes. theBeam integrates a 650nm Low-Level Laser Diode for visibly improved skin clarity alongside deep dermal firming.
• Volumetric Heating: Most mass-market tools use 2-pole systems that can create uneven "hot spots". theBeam utilizes a dynamic 8-Pole Titanium system with an ultra-flat Sapphire Crystal head to ensure even, powerful, and consistent energy delivery across the entire face, neck and beyond.
How does it compare to 'Cold' Lasers like LYMA Laser?
theBeam — $$ | 650nm Low-Level Laser Diode
• 4-in-1 Synergy: Delivers gentle warmth while combining Radio Frequency (RF), Microcurrent, and 630nm Red LED Light to provide an immediate appearance of lift and deep dermal firming while supporting a more refreshed-looking skin surface.
• Superior Efficiency: At a fraction of the cost of luxury tools, theBeam replaces the need for single-energy devices. The ultra-flat Sapphire Crystal head ensures even, professional-grade energy delivery across the entire face in a single 10-minute ritual for both instant and long-term visible results.
LYMA Laser — $$$$$ | 808nm (Near-Infrared Light) Low-Level Laser
• Passive Action: As a cold laser, this is a passive technology that often requires lengthy and consistent use to show visible change.
• Marketing Premium: You are funding million-dollar celebrity endorsements and high-margin markups, rather than investing that capital directly into your best skin.
How does it compare to 'Hot' Lasers like NIRA or DermRays?
Unlike single-energy lasers that require slow spot-treating, theBeam delivers 4-in-1 Professional Synergy to visibly lift, firm, and renew the entire face in just 10 minutes.
While high-heat lasers use intense thermal energy, theBeam uses 5.3MHz Radio Frequency to gently warm the dermis for visibly firmer-looking skin — without the aggressive heat levels associated with ablative treatments.
You also receive a gentle Microcurrent lift and 650nm Low-Level Laser Diode — technologies these standard lasers lack.
With our ultra-flat Sapphire Crystal head, you get even energy delivery across all facial curves, making it a faster and more comprehensive at-home alternative to isolated thermal treatments.
How does it compare to NuFace or FOREO BEAR?
Unlike NuFACE or FOREO BEAR, which rely solely on Microcurrent or EMS for muscle toning, theBeam is a complete at-home skin renewal system.
While those devices can create the appearance of lifted contours, they lack the thermal energy required to visibly firm the skin surface or support the appearance of deeper skin firmness.
The core differences include:
• 4-in-1 Synergy: In one 10-minute session, theBeam delivers 15W Radio Frequency, Microcurrent, 650nm Laser, and 630nm Red Light simultaneously. Standard Microcurrent tools only provide a single mode of action.
• Deep Dermal Firming: theBeam utilizes a 5.3MHz RF frequency to reach 3.5mm into the dermis, delivering precise 42°C thermal energy for visibly firmer-looking skin that standard Microcurrent cannot achieve.
• Bio-Mimetic Lift: While aggressive EMS devices can cause uncomfortable facial twitching that some users find unpleasant, our 200μA square-wave Microcurrent mimics the body's natural electrical signals for a gentle lift.
• Skin Renewal: theBeam integrates a 650nm Low-Level Laser Diode to energize the skin's surface for a visibly clearer, more radiant complexion — a precision technology completely absent from standard muscle-toning wands.
How does it compare to LED masks and wands?
Unlike standard LED masks or wands that only target the skin's surface, theBeam is a complete skin renewal system that reaches deep into the dermis.
While masks rely on passive light therapy alone, theBeam utilizes 4-in-1 Clinical Synergy to visibly lift, firm, and renew skin simultaneously. The core differences include:
Deep Dermal Firming: LED light alone cannot visibly firm the skin's surface or create the appearance of lifted contours. theBeam uses 15W Radio Frequency (5.3MHz) to penetrate 3.5mm deep, delivering precise 42°C thermal energy for visible firming.
Dual-Light Renewal: We replaced the moderate energy of plastic LED bulbs with a professional-grade 650nm Laser Diode and 630nm Red Light to support a visibly clearer, more radiant complexion and the skin's natural renewal process.
Time Efficiency: Most masks require 20+ minutes of wear for a single energy. theBeam completes a full 4-in-1 treatment — lifting, firming, and renewing — in a single 10-minute ritual.
Premium Hardware: Instead of flimsy plastic wands or uncomfortable corded masks, theBeam features an ultra-flat Sapphire Crystal head and 8-Pole Titanium system for even, professional-grade energy delivery.
4 Synergies.
1 System.
The world's first system to unite 15W High-Power RF with Bio-Mimetic Microcurrent, Laser, and Red Light.
It targets every layer of the skin simultaneously — for visibly firmer-looking skin, an energized complexion, and toned contours in a single session.
15W & 5.3MHz RF - Firm
200µA Microcurrent - Tone
650nm Laser - Renew
630nm Red Light - Calm
