theBeam Renew Frequency RF skin device, bronze metallic body with illuminated sapphire treatment head
theBeam RF device in use along the cheek, red light treatment head in contact with skin
theBeam device showing its four energies: 15W RF, microcurrent, 650nm laser and red light
theBeam Renew Frequency
theBeam Renew Frequency RF skin device shown with a Trustpilot 'Rated Excellent' banner and customer-submitted photos labelled Day 1 and Day 35
Side-by-side specification comparison of theBeam and a single-function RF device

CLINIC-INSPIRED RF SYSTEM

theBeam Renew Frequency

Firmer-Looking Skin. Engineered for Home Use.

Age powerfully with theBeam Renew Frequency. The world’s first system integrating 15W & 5.3MHz Radio Frequency (RF), Microcurrent, 650nm Laser, and 630nm Red Light. Experience professional-grade skin renewal and a visibly lifted look, all at home.

Independent study: +26% elasticity in 28 days*. Visibly smooths and evens skin tone. Zero downtime. Zero fat loss.

*30 participants. Individual results may vary.

90-day satisfaction guarantee

complimentary delivery

FCC (US) & CE (EU) Certified Safe

12-months warranty

Visible Lift at Home

Dynamic 8-Pole Titanium Radio Frequency (RF) delivers precise 42°C dermal heating (3.5mm deep) to support collagen firmness. Microcurrent energizes muscles for a lifted look.
Title

Advanced Skin Renewal

650nm Laser & 630nm Red Light revive skin cells for visibly stronger, smoother and clearer skin.
Title

The Portable Skin Clinic

Wireless & IPX6 Water-resistant. Crafted with Sapphire & Titanium for durability on the go.
Title

Unlimited Personalization

2 modes. 5 intensities. Adapts to face, neck, and body—eliminating the need for multiple devices.

Target

Wrinkles

sagging

texture

pigmentation

scars

See it in action

How to use

01.

Cleanse

Remove all makeup and thoroughly cleanse your face.

02.

Apply Skincare Glide

Apply a water-based serum or gel to your skin or the device head to ensure optimal microcurrent energy flow and smooth gliding.

Can be used over a sheet mask, though energy output may be reduced.

Reapply if dryness or resistance occurs.

Avoid oils or thick creams, as they can interfere with performance.

Glide with purpose. Repeat with care. Always lift.

Explore The Full Tutorial

How often to use

Recommended usage: 2–4 sessions per week with a minimum 24-hour interval for tissue recovery.

Apply Sculpt or Tighten mode (or both) to each area for 6–16 minutes.

Enjoy an instant lifted, refreshed look within minutes.

Independent test showed visible lifting, smoothing and firming within 4 weeks.

Individual response varies; early changes are often observed within 2 weeks.

Compatible skincare

Use any water-based skincare product, this helps conduct the energy evenly and ensures smooth glide. 

 

A few options we recommend: 

• Hyaluronic acid serum (deep hydration and conductivity) 

• A hydrating sheet mask (great for comfort and glow) 

• Water-based lotion (as long as it’s not too thick or oily) 

• Pure aloe vera gel (light and soothing) 

 

Avoid creams or oils, as they block the Microcurrent and Radio Frequency (RF). 

 

If you’re ever unsure, just check the first ingredient — if it’s water (aqua), it’s usually perfect!

Device specs

Energies: Radio frequency (RF), Microcurrent, 650nm Laser, 620–630nm Red Light

Radio Frequency (RF) Power: 15W

Radio Frequency (RF) Range: 0.5-5.3MHz

Microcurrent: 200μA output, square wave, 10% duty cycle

Waterproof Rating: Full-body IPX6

Device Dimensions: 160mm x 38mm x 38mm

Charging Port: Type-C 

Charging Base Dimensions: 8mm x 38mm x 38mm

Lens Material: Sapphire crystal

Charging Method: Wireless charging

Battery Capacity: 2600mAh

Rated Input: 5V=2A

In the box

theBeam Renew Frequency Device

USB Charging Base

USB Charging Cable (Type C)

Is this right for you

Who Should Not Use This Device?

Do not use if you have any of the following:

Medical Implants: Pacemakers, heart defibrillators, or any electronic medical devices.

Metal in the Area: Dental braces or metal bone implants in the treatment area.

Pregnancy/Age: If you are pregnant, breastfeeding, or under 18.

Health Conditions: Active acne, open wounds, fresh scars, or a history of cancer/weakened immune system.

Sensitive Areas: Avoid the mouth, genitals, and the centre of the neck (thyroid area).

Smart-Safety Feature

Automatic Pause: This device includes a built-in motion sensor. The 15W RF energy will automatically pause if the wand stops moving for a while, preventing heat build-up and keeping your skin safe.

Important Warnings

Keep it Moving: For the best results, always keep the device gliding slowly across your skin. 

Protect Your Eyes: Never look directly into the red light beam. Avoid use on your eyelids or inside the eye socket.

Watch the Heat: If your skin feels uncomfortably hot, stop immediately.

Independently tested results.

Independent lab analysis confirms visible skin improvement in just 28 days.

Skin Elasticity

26.2%

- 40.5%

Forehead Wrinkle

theBeam before and after for forehead lines theBeam before and after for forehead lines
Day 1
Day 28

- 23.4%

Crow's Feet

theBeam before and after for Eye wrinkles theBeam before and after for Eye wrinkles
Day 1
Day 28

- 15.4%

Nasolabial Fold

theBeam before and after for Smile lines theBeam before and after for Smile lines
Day 1
Day 28

*Unretouched photos. Data based on instrumental analysis of 30 participants after 28 days of consistent use. Testing conducted by independent laboratories.

The skin clinic in your hands.

Standard devices cap at 3W. theBeam utilizes 15W High-Power RF to match in-clinic energy. The difference between surface-level vibration and deep, visible results.

Dynamic 8-Pole RF

Engineered with 5.3MHz frequency (vs. in-clinic 6MHz). Delivers precise 42°C thermal energy to the 3.5mm dermal layer for visible firming — with zero fat loss.

Your 28-day renewal journey

Consistency is the catalyst. Commit to 3+ sessions weekly to build your foundation. After 28 days, you define the pace: momentum or maintenance.

Day 1

Instant Revitalization

The first 10 minutes change everything. Fluid drainage and boosted micro-circulation deliver a subtle, instant lift to your brows and jawline. 

 

You emerge from your ritual looking luminous and beautifully refreshed.

Day 28

Visible Transformation

The change becomes structural. Your skin feels denser, clearer, and more resilient.

 

This is the phase where friends tell you that you look incredible, but they can't quite pinpoint exactly what has changed.

2 Months

Sustained Definition

Now, the results are part of you. Your jawline looks reclaimed and your skin carries a youthful "bounce" that stays. 

 

You have sculpted your features while protecting the natural volume that defines your beauty. 

The power of a clinic. The comfort of your sanctuary.

A single investment that replaces years of clinic fees and creates space on your vanity.

Replaces

$2,620 Thermage®

$549 Microcurrent

$4,080 LYMA Laser

$530 RF

$980 LED Mask

$1,300 HIFU

A powerhouse in the palm of your hand.

Elegant design, precision engineering.

4 Energies.
1 System.

15W High-Power RF

Bio-Mimetic Microcurrent

True 650nm Laser

630nm Red Light
Wireless Charging, Magnetic type-C charging base Wireless Charging, Magnetic type-C charging base Wireless Charging, Magnetic type-C charging base

Cordless
Freedom

Magnetic

charging

Compact &

Travel-ready
Wireless Charging, Magnetic type-C charging base
theBeam titanium electrode theBeam titanium electrode theBeam titanium electrode

8 Titanium Electrodes

Safe for sensitive skin
theBeam titanium electrode
theBeam Ultra-flat A++  Sapphire Head theBeam Ultra-flat A++  Sapphire Head theBeam Ultra-flat A++  Sapphire Head

Ultra-flat
Sapphire Lens

Optimal energy

transmission

Unmatched durability

Smooth luxury glide

Cool-touch sensation
theBeam Ultra-flat A++  Sapphire Head
theBeam water proofing- the device body is with some water on the surface. theBeam water proofing- the device body is with some water on the surface. theBeam water proofing- the device body is with some water on the surface.

IPX6 Water-Resistant
Aluminum Body

Fully sealed hygienic body

Rinse clean in seconds

Medical-grade unibody design
theBeam water proofing- the device body is with some water on the surface.

AI Thermal Protection

Monitors skin 100x per sec

Motion-activated heat regulation
Intelligent Temperature Control

Authorities Tested Safe

FCC (US) & CE (EU) Compliant

Trusted by experts & editors.

Don't just take our word for it.

Stop compromising. 

See why theBeam replaces your entire shelf.

  • RF / Microcurrent

  • Hot / Cold Laser

  • LED Light

Basic RF / Microcurrent Devices

$$

$ - $$$

Lasting

Results

15W & 5.3MHz (clinic-comparable) RF + laser diodes

Simultaneous 4-in-1 firming system

Results compound

Surface

Results

Weak (1–3MHz) or no RF

Microcurrent/ EMS cannot remodel collagen

Toning results plateau quickly

Comfortable Experience

Gentle warmth, no twitching

Safe for frequent use

Inconsistent Experience

EMS twitching may worsen wrinkles

Hot spots risk fat loss

Precision Energy Delivery

Ultra-flat sapphire head

Full contact on all curves

8-Pole Titanium field

Flawed Contact Design

Tip or point design

Uneven contact & energy drop-off

2-Pole surface delivery

Portable &

Durable

Wireless & travel-ready

Full-body waterproof

Easy-clean

Hard to Use &

Maintain

Plug-in charging

Bulky build

Complex to clean and maintain

Hot/ Cold Laser Devices

$$

$$ - $$$$$

4-in-1

Synergy

650nm Low-Level Laser Diode & 630nm Red Light + 15W RF + Microcurrent

Simultaneous lift, firm, and renew

Full treatment in just 10 mins

Single-Energy Action

LYMA: 808nm (near-infrared) Cold Laser

NIRA/DermRays: Heat-Only Laser

Requires 20–30min daily sessions

Targeted

Firming

5.3MHz RF preserves fat pads

Precise 42°C collagen trigger

Visible fri in 28 days

Volume Risk / Slow Results

NIRA: Targeted thermal damage risks fat loss

DermRays: IPL targets surface only

LYMA: Lengthy use for visible change

Precision Engineering

Ultra-flat Sapphire Crystal head

8-Pole Titanium volumetric field

Wireless & Full-body Waterproof

Hardware Limitations

Small laser windows (spot treatments)

Uneven contact & energy drop-off

Have cords & hard to clean

LED Light Masks / Wands

$$

$ - $$$

Clinical

Synergy

650nm Low-Level Laser Diode & 630nm Red Light + RF + Microcurrent

Targets dermis & surface

Full treatment in just 10 mins

Surface-Only

Action

Low-energy LED light

Passive energy; no mechanical lift

Often requires 20+ mins

Visible

Firming

5.3MHz RF reaches 3.5mm deep

Delivers gentle thermal energy for firmer-looking skin

Firms skin without affecting natural facial contours

Limited

Results

No skin structure change

No thermal firming

Moderate energy; slow results

Precision

Engineering

Ultra-flat Sapphire Crystal head

8-Pole volumetric field

Full-body Waterproof

Hardware

Flaws

Plastic bulbs or flimsy wand tips

Uneven light distribution

Often corded or hard to clean

How does it compare to VEAUTY Dot?

Not all RF is equal.

 

VEAUTY Dot: 1.5MHz, wattage undisclosed — fractional RF, surface warming, gone by morning.


theBeam: 5.3MHz & 15W RF, engineered to deliver energy beyond the surface layer for visible firming.

 

• One head. One investment. No treatment heads to keep repurchasing. The Sapphire & Titanium head is built to last the life of the device.

 

• 4-in-1 vs. single-function. RF, microcurrent, laser, and red-light technology in one chassis. VEAUTY Dot runs RF alone.

 

• 42°C thermal ceiling. Engineered to define contours without affecting facial volume.

 

• A true 650nm laser diode, not an LED. The same light technology found in professional clinic systems — not a red-light panel.

 

• Water-resistant to IPX6. Your ritual isn't confined to the vanity.

How does it compare to multi-tools like Amiro or Medicube?

While standard multi-tools like Medicube or Amiro offer variety, they often sacrifice power for versatility, typically operating at lower consumer-grade outputs.

 

theBeam is engineered as a clinic-inspired at-home alternative, delivering 15W of power and a 5.3MHz frequency — comparable to professional in-clinic systems such as Thermage® (6MHz)*. The core differences lie in technology and efficiency:

 

• Simultaneous vs. Sequential: Many devices require you to switch between separate modes for different treatments. theBeam uses 4-in-1 Synergy, firing Radio Frequency, Microcurrent, Laser, and Red Light simultaneously to complete a full 4-in-1 treatment in just 10 minutes.

 

• True Laser vs. LED: While devices like the Medicube focus on surface-level LED and electroporation, they lack precision laser diodes. theBeam integrates a 650nm Low-Level Laser Diode for visibly improved skin clarity alongside deep dermal firming.

 

• Volumetric Heating: Most mass-market tools use 2-pole systems that can create uneven "hot spots". theBeam utilizes a dynamic 8-Pole Titanium system with an ultra-flat Sapphire Crystal head to ensure even, powerful, and consistent energy delivery across the entire face, neck and beyond.

How does it compare to 'Cold' Lasers like LYMA Laser?

theBeam — $$ | 650nm Low-Level Laser Diode

 

• 4-in-1 Synergy: Delivers gentle warmth while combining Radio Frequency (RF), Microcurrent, and 630nm Red LED Light to provide an immediate appearance of lift and deep dermal firming while supporting a more refreshed-looking skin surface.

• Superior Efficiency: At a fraction of the cost of luxury tools, theBeam replaces the need for single-energy devices. The ultra-flat Sapphire Crystal head ensures even, professional-grade energy delivery across the entire face in a single 10-minute ritual for both instant and long-term visible results.

 

LYMA Laser — $$$$$  | 808nm (Near-Infrared Light) Low-Level Laser


• Passive Action: As a cold laser, this is a passive technology that often requires lengthy and consistent use to show visible change.

• Marketing Premium: You are funding million-dollar celebrity endorsements and high-margin markups, rather than investing that capital directly into your best skin.

How does it compare to 'Hot' Lasers like NIRA or DermRays?

Unlike single-energy lasers that require slow spot-treating, theBeam delivers 4-in-1 Professional Synergy to visibly lift, firm, and renew the entire face in just 10 minutes. 

 

While high-heat lasers use intense thermal energy, theBeam uses 5.3MHz Radio Frequency to gently warm the dermis for visibly firmer-looking skin — without the aggressive heat levels associated with ablative treatments.

 

You also receive a gentle Microcurrent lift and 650nm Low-Level Laser Diode — technologies these standard lasers lack.

 

With our ultra-flat Sapphire Crystal head, you get even energy delivery across all facial curves, making it a faster and more comprehensive at-home alternative to isolated thermal treatments.

How does it compare to NuFace or FOREO BEAR?

Unlike NuFACE or FOREO BEAR, which rely solely on Microcurrent or EMS for muscle toning, theBeam is a complete at-home skin renewal system. 

 

While those devices can create the appearance of lifted contours, they lack the thermal energy required to visibly firm the skin surface or support the appearance of deeper skin firmness. 

 

The core differences include:

• 4-in-1 Synergy: In one 10-minute session, theBeam delivers 15W Radio Frequency, Microcurrent, 650nm Laser, and 630nm Red Light simultaneously. Standard Microcurrent tools only provide a single mode of action.

 

• Deep Dermal Firming: theBeam utilizes a 5.3MHz RF frequency to reach 3.5mm into the dermis, delivering precise 42°C thermal energy for visibly firmer-looking skin that standard Microcurrent cannot achieve.

 

• Bio-Mimetic Lift: While aggressive EMS devices can cause uncomfortable facial twitching that some users find unpleasant, our 200μA square-wave Microcurrent mimics the body's natural electrical signals for a gentle lift.

 

• Skin Renewal: theBeam integrates a 650nm Low-Level Laser Diode to energize the skin's surface for a visibly clearer, more radiant complexion — a precision technology completely absent from standard muscle-toning wands.

How does it compare to LED masks and wands?

Unlike standard LED masks or wands that only target the skin's surface, theBeam is a complete skin renewal system that reaches deep into the dermis. 

 

While masks rely on passive light therapy alone, theBeam utilizes 4-in-1 Clinical Synergy to visibly lift, firm, and renew skin simultaneously. The core differences include:

 

Deep Dermal Firming: LED light alone cannot visibly firm the skin's surface or create the appearance of lifted contours. theBeam uses 15W Radio Frequency (5.3MHz) to penetrate 3.5mm deep, delivering precise 42°C thermal energy for visible firming.

 

Dual-Light Renewal: We replaced the moderate energy of plastic LED bulbs with a professional-grade 650nm Laser Diode and 630nm Red Light to support a visibly clearer, more radiant complexion and the skin's natural renewal process.

 

Time Efficiency: Most masks require 20+ minutes of wear for a single energy. theBeam completes a full 4-in-1 treatment — lifting, firming, and renewing — in a single 10-minute ritual.

 

Premium Hardware: Instead of flimsy plastic wands or uncomfortable corded masks, theBeam features an ultra-flat Sapphire Crystal head and 8-Pole Titanium system for even, professional-grade energy delivery.

Frequently asked questions.

Got more questions? Message us via the online chat.

  •  Results 

  •  Usage 

  •  Suitability 

  •  Technology 

  •  Purchase

How long does it take to see a visible difference?

Most users see an instant lifted, refreshed look after their first session. Visible results compound over 28 days of consistent use.

 

In an independent 28-day instrumental study*, participants measured:

 

- a 26% increase in skin elasticity

- a 23% reduction in crow's feet visibility

- a 40% reduction in forehead wrinkle depth

 

Some users notice visible tightening within 10 days. Results vary.

 

For best results, use theBeam 3 times per week for the first month.

 

*30 participants. Individual results may vary.

What should I check if progress feels slow?

Change this gradual is hard to see in the mirror. Four things to check.

 

1. Take photos. Front-on and side profile, same light, same time of day, every two weeks. Day 1 against Day 30 is the only honest comparison — daily mirror checks aren't.

 

2. Check your contact. All eight electrodes need full skin contact. Move slowly and let the warmth build before shifting to the next section.

 

3. Progress your intensity level. If lower intensities have felt comfortable for a few weeks, it is time to increase.

 

4. Prep the skin. Always apply a conductive gel or moisturizer before use. Energy transfers through hydration, not dry skin.

 

Missed sessions are the most common reason progress stalls. Consistency compounds — gaps reset the momentum.

 

Still concerned after eight weeks of consistent use? Email theConcierge.

Will it reduce facial fat?

No. theBeam uses 5.3MHz Radio Frequency calibrated to deliver 42°C thermal energy to the 3.5mm dermal layer — above the subcutaneous fat layer. This depth targets the dermis for visible firming results.

How often should I use theBeam?

Recommended Usage: 2–4 sessions per week, with a minimum 24-hour interval for skin rest.

 

Treatment Time: 6–16 minutes per session. 

 

'Sculpt Mode' runs for 6 minutes; 'Tighten Mode' runs for 10 minutes.

 

You may use one mode only or treat the same area (e.g., lower face, full face, or neck) with both modes sequentially in a single session, depending on your treatment goals.

 

The Results:

•Instant: A lifted, refreshed look immediately after use.

•Long-term: In an independent study, users experienced visible lifting, smoothing, and firming within 4 weeks. While individual results vary, early improvements are often observed within 2 weeks.

 

The Ritual: 

Consistency is the catalyst. We recommend committing to 3+ sessions weekly to build your foundation. 

 

After 28 days, you define the pace: continue for momentum, or switch to maintenance (1–2 sessions weekly).

What skincare should I use with it?

Use any water-based skincare product, this helps conduct the energy evenly and ensures smooth glide. 

 

A few options we recommend: 

• Hyaluronic acid serum (deep hydration and conductivity) 

• A hydrating sheet mask (great for comfort and glow) 

• Water-based lotion (as long as it’s not too thick or oily) 

• Pure aloe vera gel (light and soothing) 

 

Avoid creams or oils, as they block the Microcurrent and Radio Frequency (RF). 

 

If you’re ever unsure, just check the first ingredient — if it’s water (aqua), it’s usually perfect.

Can I use it on my neck or body?

Yes. theBeam can be used on the neck, jowls, and body areas like the hands, stomach, and thighs.

 

Its flat sapphire head and eight titanium electrodes ensure full-surface contact and even energy distribution, making it suitable for both smaller areas like the face and neck and larger areas such as the hands, stomach, and thighs.

 

Body skin is generally thicker than facial skin, so visible improvements may take longer and benefit from consistent use.

 

For the neck, avoid the centre directly over the thyroid.

 

It's fine to use theBeam on the upper chest and décolletage area. Avoiding the breast tissue itself, and consult a healthcare provider before doing so — particularly if you have breast implants, are pregnant or breastfeeding, or have a current or recent history of breast cancer. 

What sensations are normal during treatment?

Gentle warmth

Yes — this is expected. Continue treatment.

 

Mild tingling or pulsing

Yes — this indicates Microcurrent energy conduction. Ensure skin is well hydrated.

 

Sharp or “zapping” sensation

No — add more skincare products and/or reduce intensity.

 

Burning sensation

No — stop immediately and contact support.

 

Treatments should feel warm and active, not painful.

How hot should the device feel during treatment?

Some users expect strong surface heat. However, theBeam is capped at 42°C for controlled dermal heating — not surface overheating. So it should feel like a warm stone facial.

 

Its effectiveness comes from RF energy heating the 3.5mm dermal layer for visible firming results, rather than aggressively heating the skin surface.

 

If the warmth feels mild, this can be normal. The sensation may be softer because:

• A thicker gel layer buffers surface sensation

• Well-hydrated skin conducts energy efficiently

• Continuous movement distributes heat evenly

• Cooler room temperatures reduce perceived warmth

• The battery level is low

 

Heat builds progressively over several minutes.

Does it hurt? Is there any "zap" or twitching?

theBeam uses a gentle 200μA Microcurrent designed for a soft, comfortable experience rather than a traditional muscle workout. 

 

While it does not cause harsh muscle contractions, you may feel a lifting sensation as the current interacts with your skin.

 

Because individual tolerance varies, we recommend starting at the lowest intensity and applying generous water-based skincare to ensure even energy distribution. 

 

Your tolerance will naturally build over time with consistent use.

Is one mode meant to treat one area, half the face, or the full face?

The time allocated for each mode refers to the total treatment time, not per side.

 

You can use that time across:

 

• The full face (moving areas at each 2-minute beep)

• Half the face

• One targeted area (e.g., jawline or nasolabial folds)

 

For example, Sculpt Mode is 6 minutes total. You might treat:

• 2 mins forehead

• 2 mins right cheek

• 2 mins left cheek

 

Or dedicate the full 6 minutes to one focused area.

 

The choice depends on your treatment goal.

Can I use two modes on the same area in one session?

Yes. You can use both modes on the same area in a single session. 

 

We recommend:

• Sculpt first (radiance and lift)

• Then Tighten (visible firming)

 

Just keep your total session under 30 minutes and allow at least 24 hours between Tighten sessions.

How should I take care theBeam after use?

After Using: Turn off the device. Rinse it gently and quickly, then dry with a soft cloth. You can also wipe off any skincare products left on the device. Avoid using abrasive materials or harsh chemicals, as they can damage the device.

 

Storing: Allow the device to dry completely before storing it in a cool, dry place away from sunlight.

Can I use theBeam with an LED mask or panel?

Yes. They work well together.

 

theBeam has a 650nm laser diode and 630nm red light built in — but those are supporting energies for the RF and microcurrent, not the main event. With light, coverage is what counts. A mask or panel treats the whole face at once; theBeam's light works section by section as you move.

 

Use them on the same day or alternate. There's no conflict.

 

What theBeam replaces

A separate RF device. A separate microcurrent device. A separate laser device. All three are in one sapphire-headed chassis — so there's no reason to run them as separate steps.

 

Traveling

theBeam replaces the mask on the road. Cordless, IPX6 waterproof, magnetic charging — 10 minutes in a hotel bathroom instead of a rigid panel in your luggage.

How to charge theBeam and check the battery level?

CHARGING:

• To Charge: Set the device on the charging base when the power light is on. The battery lights on the device will blink while it charges.

• Fully Charged: The battery lights stop blinking when the battery is full.

*Note: Don’t use the device while it’s charging.

 

CHECK BATTERY LEVEL

• While Using: You can’t check the battery level.

• In Standby: Turn on the device to see the battery level. Five lights mean the battery is full; one light means it’s low.

 

LOW BATTERY WARNING

• When On or in Standby: The battery lights will keep blinking.

• When Off: Pressing the ‘Power / Mode’ button won’t turn on the device if the battery is low; the first light blinks five times and then turns off.

 

How often should I charge the device?

A full charge supports approximately 4–8 full sessions, depending on intensity and session durations. Recharge when the battery drops to 1–2 lights for optimal performance.

 

When the battery is very low, energy delivery may feel weaker. For consistent performance, use the device with at least 2–3 battery lights remaining.

Can I travel with theBeam?

Yes. The device contains a lithium battery.

 

• Carry-on luggage: Yes (recommended)

• Checked luggage: Not recommended due to airline regulations

 

Always confirm with your airline when travelling internationally.

Is it safe for dark & tattooed skin?

Yes. theBeam is designed for all skin tones. It uses controlled Radio Frequency, Microcurrent, Low-Level Laser Diode, and Red Light technologies that target deeper skin layers to support visibly firmer-looking skin, without targeting pigment.

 

Unlike high-heat or ablative lasers, theBeam operates at controlled energy levels not associated with the aggressive heat that can affect skin tone.

Is it safe for eyes & lids?

Around the eyes, yes. On the eyelid, no.

 

Work the orbital bone — the ridge above the brow and along the cheekbone under the eye. That's where crow's feet and under-eye laxity sit.

 

Never place the device on the eyelid itself, and never direct the laser or red light toward an open eye.

 

Keep eyes closed for any pass near the orbital area.

Who should not use theBeam?

While theBeam is designed with safety in mind, certain conditions make this technology unsuitable. Please review the following contraindications before beginning your ritual.

 

Do not use if you have any of the following:

• Medical Implants: Pacemakers, heart defibrillators, or any active electronic medical devices.

• Metal in the Area: Dental braces, surgical pins, or metal bone implants in the treatment area.

• Pregnancy & Age: If you are pregnant, breastfeeding, or under the age of 18.

• Health Conditions: Active acne, open wounds, fresh scars, a history of cancer, or a weakened immune system.

• Injectables: Wait at least 2 weeks after Botox or dermal fillers before treating those specific areas.

 

Sensitive Areas to Avoid:

• Prohibited Zones: Do not use on the mouth, genitals, or directly over the eyelids.

• Neck Safety: Avoid the centre of the neck (thyroid area). Only glide along the sides and jawline.

 

Smart-Safety Features

• Automatic RF Pause: theBeam includes a built-in motion sensor. The 15W Radio Frequency energy will automatically pause if the wand stops moving, preventing heat build-up and ensuring your skin remains protected.

 

Important Warnings

• Keep it Moving: Always keep the device gliding slowly across your skin. Holding the wand still in one spot can lead to unintended heat.

• Protect Your Eyes: Never look directly into the 650nm laser beam. Avoid use inside the eye socket or on the eyelids.

• Monitor the Heat: If your skin feels uncomfortably hot, stop the treatment immediately. Most users feel a warm, 'hot stone'-like sensation.

When should I NOT use theBeam?

Do not use theBeam if you:

• Are pregnant

• Have a pacemaker or implanted electronic device

• Have metal implants in the treatment area

• Have active skin infections, open wounds, or severe inflammation

• Have uncontrolled medical conditions affecting the skin

• Have recently had injectables (wait 2 weeks)

 

Avoid using over:

• The centre of the throat (thyroid area)

• Broken or irritated skin

• Areas with active eczema, psoriasis flare, or sunburn

 

If you are under medical supervision or unsure about a specific condition, consult your healthcare professional before use.

 

When in doubt, pause treatment and contact support.

Is it safe to use if I have Botox or Fillers?

Yes, theBeam is a great complement to clinical injectables. While injectables address volume and movement, theBeam helps improve the appearance of skin firmness and texture.

 

The Protocol: We recommend waiting 2 weeks after any injection to allow the product to settle before treating those areas.

 

Pro Tip: You can continue to use the device on untreated areas during this time.

What is Radiofrequency (RF)

RF is electromagnetic energy — the same category of wave that carries radio signals, tuned to a different job.

 

In skin devices, it produces controlled warmth. Not surface heat that sits on top, but energy engineered to work beyond surface warming.

 

That warmth is what drives visible firming and definition.

The specs that matter

15W & 5.3MHz. Output and frequency in the specification range of professional clinic systems — engineered for daily home use.

 

8 titanium electrodes. Energy distributed evenly across the treatment area instead of concentrated in one point.

 

42°C thermal ceiling. A hardware cap. The device cannot exceed it.

 

RF is the primary energy in theBeam. The microcurrent, the 650nm laser diode, and the 630nm red light are supporting energies — RF does the structural work.

How does theBeam compare to in-clinic RF treatments?

Solving the "Thermage® Pain"

Clinic machines like Thermage® reach the 42°C thermal threshold in seconds, which can be excruciating. theBeam reaches the same thermal destination (42°C)—we just do it progressively over minutes. You get the stimulation, but it feels like a hot stone massage rather than a medical procedure.

The "Engine" Reality

Don't be fooled by wattage. A clinic machine has a 200W engine but must be "throttled down" to avoid burning you. We utilize a 15W High-Power system to deliver the maximum safe energy the skin can absorb—achieving the same 42°C endpoint without the need for painkillers or cooling sprays.

Fractional RF vs. full-field RF — which do you want at home?

Fractional RF splits energy into micro-zones. Between those zones, skin gets nothing.

 

That's deliberate in a clinic, where a practitioner runs multiple sessions to build coverage over time. At home, it means every pass treats a fraction of the surface under the head.

 

theBeam treats all of it.

15W & 5.3MHz distributed across 8 titanium electrodes. Every millimeter under the head receives energy on every pass — no grid, no gaps, no hot spots.

 

Even coverage is why results compound instead of arriving in patches.

 

And what it costs to keep

Fractional architecture needs a consumable tip — heads that wear out and get replaced, for as long as you own the device.

 

theBeam runs one sapphire-headed chassis. A 42°C thermal ceiling capped in hardware. No recovery window, no heads to re-buy.

 

About 10 minutes, then straight into your evening.

Why we chose RF over Ultrasound for skin tightening?

The "Volume-Safe" Lift

While Ultrasound (HIFU) penetrates extremely deep, it carries a known risk of melting facial fat (volume reduction). As we age, preserving that volume is critical for a youthful look. We chose 5.3MHz RF because it improves the look of firmness while preserving your natural volume.

How does the 90-day trial work?

We want you to love your results. If theBeam isn't right for you, simply return it within 90 days for a full refund. We even cover the return shipping.

 

To qualify, the device must be returned in like-new condition:

•Fully functional with no visible damage or scratches.

•Returned with all original packaging and parts intact.

 

*Note: Returns showing excessive wear (beyond recommended use) or commercial usage may be rejected or subject to a fee.

Where are you based, and where do you ship from?

Proudly based in Australia. 

 

- Australian orders are shipped directly from our Melbourne HQ. 

- US orders are shipped from our Dallas, Texas warehouse. 

This ensures faster local delivery times and dedicated support from our Australian team.
 

Shipping Details:

- Free standard shipping in Australia & contiguous US (1–5 business days).

- Express shipping $15 (1–3 business days) — not available for 'Hawaii, Alaska & Puerto Rico'. 

- USPS Ground available for those regions (5–10 business days).

 

Orders processed within 0–2 business days.

What's the warranty?

theBeam Renew Frequency carries a 12-month limited warranty, effective from the date of delivery.

 

What's Covered

- Manufacturing defects

- Functional malfunctions not caused by user error or misuse

- If a covered issue arises within the warranty period, we repair or replace the device at no cost to you.

 

What's Not Covered

- Accidental damage, including drops and impacts

- Liquid damage beyond the IPX6 rating, including submersion

- Cosmetic wear and normal aging

- Misuse, improper handling, or unauthorized modification or repair

- Battery faults caused by charging outside our guidelines, including improper outlet voltage

 

No Consumables. Ever.

- theBeam runs on a single sapphire-headed chassis with an 8-pole titanium system.

- There are no attachment heads to replace every three months, and nothing to re-buy to keep it working.

 

Making a Claim

Email concierge@feelthebeam.com with:

- Your order number

- A description of the issue

- Photo or video of the defect

 

We may assess the product before confirming coverage.

We are

Innovative.
Professional.
Human.

Transform skincare.
Empower every face.

What if a professional skin clinic could live in your handbag?

Born in Australia, theBeam was developed with dermatologists and engineers to unite four advanced technologies in one compact, elegant design.

Experience complete skin renewal — without the cost or clutter of multiple single-tech devices.

Independently studied. Expertly engineered. Made to empower your to look and feel your best.

Curated skin science, expert tutorials, and member-only privileges.

About

About Us

FAQs

Tutorials

Contact Us

Care

Warranty

Returns

Social

Instagram

Facebook

YouTube

Renew Frequency

$649